Fujitsu 10 ppm, User Manual

Page: 26 / 146

User’s Manual 1-11
GETTING
STARTED
4. Load the paper. Place the
front portion of the paper
stack on the tray and slide it
backwards so that the stack is
placed under the two
stoppers. Gather the edges of
the stack together to ensure
correct positioning of paper
in the tray.
Make sure the stack does not
exceed the limit mark.
5. Lock the pressure plate. If
the front of the stack is raised,
push it down until the
pressure plate clicks into
place.
6. Install the paper tray. Align
the sides of the tray with the
guide grooves of the tray slot
and firmly slide the tray all
the way into the slot.
Notice:
You cannot install the paper tray with the pressure plate raised.
Setting Up
Limit mark
☞
Guide