Fuji Xerox DocuPrint M218 fw, User Manual

Page: 85 / 468

Printer Connection and Software Installation 84

Network Connection Setup
The following procedure uses Windows 7 as an example.
1
Click Installing Drivers and Software .
2
Select Network Installation , and then click Next .
3
If you agree to the terms of the License Agreement , click I accept the terms of the license
agreement to continue the installation process, and then click Next .
4
Select the printer you want to install from the printer list, and then click Next . If the target printer
is not displayed on the list, click Refresh to refresh the list or click Add Printer to add a printer to
the list manually. You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select
I am setting up this printer on a
server check box.
NOTE:
• If the installer displays 0.0.0.0 when you intend to use the AutoIP feature, you must enter a valid IP
address to continue.
5
Specify the printer settings, and then click Next .
a
Enter the printer name.
b
If you want other users on the network to access this printer, select Share this printer with
other computers on the network , and then enter a share name that users can identify.
c
If you want to set a printer as the default for printing, select the Set this printer as default
for printing check box.
d
If you want to set a printer as the default for scanning, select the Set this printer as default
for scanning check box.
e
If you want to install the fax driver, select the Install fax driver check box.
6
Select the software and documentation you want to install, and then click Install . You can specify
folders in which to install the software and documentation. To change the folders, click Browse .
7
Click Finish to exit the wizard.