Fuji Xerox DocuPrint M218 fw, User Manual

Page: 395 / 468

Troubleshooting 394
Print Quality Problems
This section includes:
• "The Output Is Too Light" on page 395
• "Toner Smears or Print Comes Off/Stain on Back Side" on page 396
• "Random Spots/Blurred Images" on page 397
• "The Entire Output Is Blank" on page 398
• "Streaks Appear on the Output" on page 399
• "Mottle" on page 400
• "Ghosting" on page 401
• "Fog" on page 402
• "Bead-Carry-Out (BCO)" on page 403
• "Auger Mark" on page 404
• "Wrinkled/Stained Paper" on page 405
• "The Top Margin Is Incorrect" on page 406
• "Protrudent/Bumpy Paper" on page 407
NOTE:
• In this section, some procedures use the Printer Setting Utility or SimpleMonitor. Some procedures that use
the Printer Setting Utility can also be performed using the operator panel.
See also:
• "Understanding the Printer Menus" on page 328
• "Printer Setting Utility (Windows Only)" on page 57
• "SimpleMonitor (Windows Only)" on page 58