Fuji Xerox DocuPrint M215 fw, User Manual

Page: 375 / 476

Using the Operator Panel Menus and Keypad 374

Enabling the Panel Lock
1
Press the System button.
2
Select
Admin Menu
, and then press the button.
3
Select
Secure Settings
, and then press the button.
4
Select
Panel Lock
, and then press the button.
5
Select
Panel Lock Set
, and then press the button.
6
Select
Enable
, and then press the button.
7
As necessary, select
Change Password
, and change the password using the numeric keypad.
Then, press the button.
NOTE:
• The factory-default panel password is 0000.
NOTE:
• Be sure to remember the password. The procedure described below allows you to reset the password.
However, for the DocuPrint M215 fw, the settings for the Address Book are cleared.
1 Turn off the printer. Then, while holding the System button, turn on the printer.
• If you change the password while
Panel Lock Set
is
Enable
, perform steps 1 to 2. Enter the current
password, and then press the button. Perform steps 3 to 4. Select
Change Password
, and then press
the button. Enter the new password, and then press the button. This will change the password.