Fuji Xerox DocuPrint M215 fw, User Manual

Page: 178 / 476

177 Printing Basics
Loading Print Media in the Priority Sheet Inserter (PSI)
1
First print the even pages (rear sides).
For a six-page document, rear sides are printed in the order of page 6, page 4, and then page 2.
The ( Data ) LED blinks and the
Insert Output to Tray
message appears on the LCD
panel when the even pages finish printing.
2
After the even pages are printed, remove the paper stack from the center output tray.
NOTE:
• Warped or curled prints can cause paper jams. Straighten them before setting them.
3
Stack the prints and set them as they are (with the blank side facing up) into the PSI, and then
press the
button.
Pages are printed in order of page 1 (rear of page 2), page 3 (rear of page 4), and then page 5
(rear of page 6).
NOTE:
• Printing on both sides of the paper is not possible if the document consists of various sizes of paper.