6.7 Cleaning the Printer
107
3.
Grip the tabs at both ends of the transfer
roll and gently lift it out of the printer.
Note
• Do not touch inside the printer with your hands. Some
parts may be hot. Allow time for the printer to cool
before attempting to remove parts in this area.
4.
Gently wipe the density sensor window with
a clean dry cloth or cotton swab.
Note
• Do not allow anything hard to come in contact with the
density sensor window. Do not use excessive force to
clean the window.
5.
Replace the transfer roll. Grip the tabs as
shown in the diagram.
6.
Align the arrow marks on the transfer roll to
the marks on the printer, and gently push
the roller into the printer.
7.
To lock the transfer roll into the printer push
down the tabs until you hear a click.
