Fuji Xerox ApeosPort-V 4070, Administrator'S Manual

Page: 26 / 719

1 Before Using the Machine
26
Be
fo
re Us
in
g t
h
e Ma
ch
in
e
1
4
Select [System Settings] > [Common Service
Settings] > [Power Saver Settings].
5
Select [Power Saver Timers], and then select
[Change Settings].
6
Using [ ] and [ ], set the time to elapse until
entering the Power Saver mode, in 1 minute
increments.
„
From Last Operation to Low Power Mode
Set the time to elapse from the last operation
until the machine enters the Low Power mode.
Note • The default value for [From Last Operation to
Low Power Mode] is 1 minute. You cannot disable the Low Power mode.
„
From Last Operation to Sleep Mode
Set the time to elapse from the last operation until the machine enters the Sleep mode.
Note •
The default value for [From Last Operation to Sleep Mode] is 1 minute. To make the machine enter
the Low Power mode, set a longer period of time for [From Last Operation to Sleep Mode] than for
[From Last Operation to Low Power Mode].
7
Select [Save].
8
Select [Close] repeatedly until the [Tools] screen is displayed.
9
Select [Close].