Fronius 4,044,008, Operating Instructions Manual

Page: 124 / 136

124
Plug in the sensor plug into the PC
board according to the position of the
rack holder. In this case (4)
Example:
- Torch body rack mounted at posi-
tion 2 on the holder retainer -
connect the plug of the torch body
sensor to connection 'X3 sensor 2'
on the PC board in the torch body
changeover station
Fix sensor cable using cable tie (3) as
shown
Place lid onto the torch body changeo-
ver station and secure with 8 screws
and washers (5)
And finally... Connect the compressed air line to compressed air connection "A" on the torch body
changeover station
Establish the compressed air and power supply to the torch body changeover station
(4) (3)
4
5
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
6
1
2