Fronius 4,044,008, Operating Instructions Manual

Page: 101 / 136

101
EN
Deburr the inner liner at both ends
Insert the inner liner into the torch body
Insert the TX inlet/outlet nozzle (4) fully
into the torch body
- Press down the TX inlet/outlet
nozzle until you hear a click
And finally... Thread the wire electrode into the hosepack
Connect the compressed air line to compressed air connection "A" on the torch body
changeover station
Establish the compressed air and power supply to the torch body changeover station
Place the torch body correctly onto the torch body coupling
12
(4)
NOTE! Replace the TX inlet/outlet
nozzle if:
-
no click is heard when fitting
- the TX inlet/outlet nozzle is
worn
13
14
1
2
3
4