Fronius 4,044,008, Operating Instructions Manual

Page: 97 / 136

97
EN
Unscrew the nozzle fitting (3) from the
torch body
Remove the inner liner and TX inlet/
outlet nozzle (4) from the torch body
- Keep TX inlet/outlet nozzle for re-
fitting at a later stage
Put the nozzle fitting, spatter guard,
contact tip and gas nozzle back on
again
Insert inner liner (5) as far as it will go
into the torch body
Push the cutting aid (6) as far as it will
go onto the inner liner
Tighten the locking screw (7) of the
cutting aid
Pull the inner liner (5) and cutting aid
(6) out of the torch body
- do not change the position of the
cutting aid on the inner liner
(3)
4
(4)
5
6
(5) (7)
(6)
7
8
9
10