Fronius 4,044,008, Operating Instructions Manual

Page: 19 / 136

19
EN
Torch body coupling
- The torch body coupling enables the
torch body to be changed, length of
coupling = 50 mm (1.97 in.)
Robacta TX W torch body Wire cutter
Contact tip rec-
ommendation
Note on wirefeed-
ing
Compatible sys-
tem components
for the overall
welding system Only use the torch body changeover system in conjunction with the following system com-
ponents:
-
Any power source from the TS/TPS series
- Any Fronius robot wire-feed unit
- Robacta hosepacks
- Robacta Drive hosepacks
- Robacta Drive CMT hosepacks
- Robacta Reamer V Easy, Robacta Reamer V
- Robacta Reamer aluminium brush head
- Robacta TC series
(1)
NOTE! The locking balls (1) are
intended for dry operation. Do not
lubricate the locking balls.
NOTE! In conjunction with the torch body changeover system, we recommend
that you use the 'CB' contact tip.
NOTE! The torch body changeover system can only be used in conjunction with
wirefeeding from the drum coil.