Fronius 4,044,008, Operating Instructions Manual

Page: 40 / 136

40
Application example
Application ex-
ample
NOTE! Irrespective of the overall welding system setup
- adhere to the compressed air specifications
- provide the compressed air supply to the wire-feed unit and the torch body
changeover station as shown
(1) Compressed air supply line 5.50 -
6.00 bar (79.77 - 87.02 psi) (10) Torch body changeover station with
interface
(2) Compressed air supply line for
wire-feed unit max. 6.00 bar (87.02
psi) (11) Data cable
(3) Wire-feed unit (12) Robot
(4) Junction valve (13) Drum coil
(5) Compressed air supply line from
torch body changeover station to
torch body coupling on the robot 13
bar (174.05 psi) (14) Power source with cooling unit
(6) Hosepack with torch body coupling
and Robacta TX torch body (15) Power source interface
(7) Compressed air maintenance unit
with filter (16) Data cable
(8) Compressed air supply line for
torch body changeover station 5.50
- 6.00 bar (79.77 - 87.02 psi) (17) Robot control
(9) Y-distributor
(1) (2) (4) (5)
(10) (8)
(9)
(11) (12) (13) (14) (15) (16) (17)
(3)
(6) (7)