Fronius 4,044,008, Operating Instructions Manual

Page: 66 / 136

66
Connecting and adjusting the compressed air ampli-
fier
General
Connecting the
compressed-air
booster unit
Screw a compressed air connection
that is suitable for the compressed air
supply line into the compressed air
connection "B" on the torch body chan-
geover station
- Seal the compressed air connecti-
on using thread sealing tape
Depressurise the compressed air sup-
ply line and make sure that this com-
pressed air supply line remains
depressurised for the duration of the
work on the device
Connect compressed air supply line to
compressed air connection "B" on the
torch body changeover station
Supplying the compressed air supply
line with compressed air
Undo the 8 screws (1)
Remove lid (2)
NOTE! When using the compressed air maintenance unit option, connect and ad-
just the compressed air amplifier as per the "Compressed air maintenance unit"
section in the "Robacta TX options" operating instructions.
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
1
2
3
4
5
6