Foundry NetIron MLX Series Installation and Basic Configuration Guide
3-52
© 2008 Foundry Networks, Inc.
December 2008
Pwr
On
The module is
receiving power.
Off
The module is not receiving power.
You can do the following:
•
Make certain that the module
is installed properly. For more
information, see “Installing
NetIron MLX-4 Modules” on
page 3-7, “Installing NetIron
MLX-8 Modules” on page 3-
15, “Installing NetIron MLX-16
Modules” on page 3-23, or
“Installing NetIron MLX-32
Modules” on page 3-33.
•
If using AC power supplies,
see the entry for the AC
power supply LED in this table
for more information.
10/100/1000
Ethernet Port
On (Green)
A link is established
with the remote port.
Off
A link is not established with the
remote port. You can do the
following:
•
Verify that the connection to
the other device has been
properly made. Also, make
certain that the other device is
powered on and operating
correctly.
•
Try using a different cable.
10/100/1000
Ethernet Port
On or blinking
(Yellow)
The port is transmitting
and receiving packets.
Off for an
extended
period
The port is not transmitting or
receiving packets.
You can check the other
10/100/1000 Ethernet port LED to
make sure a link is established
with the remote port. If not, take
the actions described in the
Meaning/Action column for the
other 10/100/1000 Ethernet port
LED.
Table 3.5: Desired and Abnormal LED States After System Power On (Continued)
LED
Desired State
Meaning
Abnormal
State
Meaning/Action
