Fortinet AP400 Series, Installation Manual

Page: 88 / 102

USA 74
Limits for Occupational/Controlled Exposure
Limits for General Population/Uncontrolled Exposure
Frequencies Blocked for Regulatory Compliance
802.11a frequencies 5.25-5.35 GHz and 5.47-5.725 GHz have been blocked for DFS compli-
ance.
USA
Underwriters Laboratories
For the AP150, AP300, AP400, AP1000, and the OAP180 series, the following statement and
notices are applicable:
Use only with Listed I.T.E. equipment.
Frequency
Range (MHz)
Electric Field
Strength (E)
(V/m)
Magnetic Field
Strength (H)
(A/m)
Power
Density (S)
(mW/cm2)
Averaging
Time |E|2, |H|2
or S (minutes)
1500-100,000 5 6
Frequency
Range (MHz)
Electric Field
Strength (E)
(V/m)
Magnetic Field
Strength (H)
(A/m)
Power
Density (S)
(mW/cm2)
Averaging
Time |E|2, |H|2
or S (minutes)
1500-100,000 1.0 30
Occupational/controlled limits apply in situations in which persons are exposed as a consequence of
their employment provided those persons are fully aware of the potential for exposure and can exercise
control over their exposure. Limits for occupational/controlled exposure also apply in situations when
an individual is transient through a location where occupational/controlled limits apply provided he or
she is made aware of the potential for exposure.
General population/uncontrolled exposures apply in situations in which the general public may be
exposed, or in which persons that are exposed as a consequence of their employment may not be fully
aware of the potential for exposure or can not exercise control over their exposure.