Fortinet AP400 Series, Installation Manual

Page: 37 / 102

Install the AP433e 23
Purchase optional mounting kits to mount the AP433e either from the ceiling or inside an
enclosure:
•
Above Suspended Ceiling Mounting Kit (T-Bar Hanger): MNT-SCRMKIT-01
•
Above hanging ceiling tiles. Suitable for use in environmental air space in accordance with
the Section 300-22(c) of the National Electric Code and Sections 2- 128.12 - 010 (3) and 12
- 100 of the Canadian Electrical Code. Part 1. C22. 1.
To complete AP433e installation, you need the items listed below.
Additional Equipment
A power source is needed to power the AP433e. See “Determine Power Requirements” on
page 22 .
Install the AP433e
• “Select a Location” on page 24
•
“Attach the Provided Antennas” on page 25
• “Install the Access Point” on page 26
Installation Type Items Required
Horizontal mounting None
Vertical mounting over a wall stud
•
Four #6 x 2" wood screws for a wood stud; or
•
Four #6 x 1½” metal screws for a metal stud
•
Mounting bracket
Vertical mounting on sheetrock
•
Four #6 x 1" screws
•
Four #4-6 x 7/8” ribbed plastic wall anchors
•
Mounting bracket
Horizontal mounting below a hanging
ceiling None
Mounting above a ceiling tile Mounting bracket MNT-SCRMKIT