Fortinet AP400 Series, Installation Manual

Page: 35 / 102

Safety Precautions 21
3
Installing AP433e
This chapter describes how to install and configure an AP433e, which is supported on System
Director versions 5.0 and later. It contains the following sections:
•
“Safety Precautions” on page 21
• “Unpack the AP433e” on page 21
•
“Determine Power Requirements” on page 22
• “Installation Requirements” on page 22
•
“Install the AP433e” on page 23
• “Check AP433e LED Activity” on page 36
•
“Where to Go From Here” on page 37
Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and
operating this product.
If an optional power supply is used, it must be one supplied by Fortinet.
The AP433e is intended only for installation in Environment A as defined in IEEE 802.3af. All
interconnected equipment must be contained within the same building, including the intercon-
nected equipment's associated LAN connection.
Unpack the AP433e
Confirm that the AP433e shipping package contains these items:
•
AP433e
• Nine antennas
•
Wall mounting bracket