Fortinet AP400 Series, Installation Manual, Page: 43 / 102

Install the AP433e 29
Figure 9: Ports for the AP433e
Mount AP433e Below a Suspended Ceiling
The brackets on the bottom of the AP433e allow it to be mounted directly to a ceiling T-bar
(see
Figure 10 on page 29 ). Note that the AP lock must be disabled by sliding the locking key
(provided in the box) into the unlock hole on the side of the AP shown in Figure 9 on page 29
in order to clip the AP in place.
Figure 10: Mounting AP433e to a Suspended Ceiling Rail
To mount an AP433e below a suspended ceiling:
1.
Determine the location on the ceiling rail where the AP will be mounted and remove the
ceiling tiles.
RESET
USB
CONSOLE
G1
Console
port Ethernet
port USB
port
00260
T-bar
(in ceiling)
00261