Fortinet AP400 Series, Installation Manual

Page: 32 / 102

AP400 18
AP400 Configurations
Features for the AP400 include:
•
Up to three 802.11n-capable wireless radios with no licensing requirement.
• 802.11n support with channel bonding in both 2.4GHz and 5GHz frequency bands. Chan-
nel bonding combines two 20MHz channels into a single-wide 40MHz channel for
increased throughput.
•
Dual-band external antenna options optimized for MIMO mode.
• Plug and Play deployment using centralized controller platforms.
•
Multi-layered security including standard WPA2, 802.11i security (such as automatic traffic
inspection).
•
Each of these Access points may be powered by a standard 802.3af or 802.3at PoE
device. However, in order to utilize all three radios in 3x3 operation, 802.3at PoE is
required.
• Air Traffic Control technology for 802.11n devices and legacy a/b/g devices
•
3x3 MIMO with 3 transfer chains and 3 receive chains, delivering three spatial streams
• Channel span architecture which requires no channel planning or configuration
•
Nine standard multiband, omni-directional antennas for AP433e.
Model Configuration
AP433e Three dual-band 802.11n radios with 3x3 MIMO and external antennas.
AP433i Three dual-band 802.11n radios with 3x3 MIMO and internal antennas.
AP433is Two dual-band 802.11n radios and a spectrum radio with internal
antennas.
OAP433e Three dual-band 802.11n radios (two with 3x3 MIMO, one with 3x2)
and external antennas.