Fortinet AP400 Series, Installation Manual

Page: 49 / 102

Install the AP433e 35
Figure 16: T-Bar Mounting Bracket
1.
Remove the ceiling tile alongside which the AP will be mounted.
2.
Be sure that AP433e is not locked by inserting the locking key into the Unlock mechanism
as shown in
Figure 17 on page 35 below.
Figure 17: Ports and Unlock Mechanism for the AP433e
3.
Align the mounting bracket with the AP433e slots used for the ceiling t-bar in “Mount
AP433e Below a Suspended Ceiling” on page 29 .
4.
Press down on the tab indicated on the underside of the AP and twist the AP into place.
5.
Push down on the thumbscrews provided on the mounting bracket and clip it to the ceiling
bar that will support the AP.
6.
Tighten the screws to ensure that the mechanism stays locked in place.
RESET
USB
CONSOLE
G1
Console
port Ethernet
port USB
port
00260
Unlock