Fort F 400, Use And Maintenance Instructions

Page: 39 / 96

39
ENGLISH ENGLISH
TECHNICAL DATA
ENGINE
Type 4/6 HP 4 strokes
Cooling Forced air
Displacement -
Output (HP/kW at 3600 rpm) 4
÷
4,8 kW/, 5
÷
6,5 HP
Starting Recoil starter
Tank capacity -
TRANSMISSION Type Mechanical
Max speed: forward 1 st : 1Km/h
forward 2 nd : 2,2Km/h
rearward 0,8 Km/h
Safety clutch -
DIMENSIONS Max. height 900 mm
Max. width 700 mm
Max. length 1700 mm
Crawlers dimensions 180 x 60 x 38 mm
Track 520 mm
Carrier bed board length 1000 mm
Carrier bed board width (adjustable) 700 - 1000 mm
Side plates height 210 mm
CARRYING CAPACITY Max. loading on level ground 380 Kg
Max. loading on 30% slope 250 Kg
Weight with no load 165 Kg
1.6 TECHNICAL SPECIFICATIONS
2.1 SAFETY
The personnel shall be instructed on the risks result-
ing from accidents on the devices arranged for the
operator’s safety and on the general accident preven-
tion regulations provided for by the legislation of the
Country where the machine is being used.
While designing the machine, all the potential dan-
gerous situations were foreseen and consequently the
proper protections were adopted. Anyhow, the level
of accidents caused by the careless and improper use
of the machine is still high.
The carelessness, the irresponsibility and the too
much familiarity are too often the cause of accidents
as well as tiredness and sleepiness.
You shall read this manual very carefully and in par-
ticular the section concerning the safety regulations.
SECTION 2
Safety and accident prevention
DANGER
The Manufacturer shall not be held responsible for
the non-compliance with the safety and accident
prevention regulations provided for by the laws and
for the non-compliance with what is provided for in
this manual.
DANGER
Pay attention to this symbol in the instructions
manual.
It shows a possible hazard.