ISSUE
: 21/09/03
FD 6100 MAINTENANCE
MANUAL
REVISION
: 2.1
SECTION
: 01
PAGE 51
CONTENTS
5
DISASSEMBLING, RE-ASSEMBLING AND ADJUSTMENTS
5.1 TOOLS
DESIGNATION
REF.
FUNCTION
SEPARATION ASSEMBLY TOOL
4103791G Separation assembly adjustment.
GREASE OF SYNTHESIS
MULTIMETER
Ohmmeter
T10 TORX
Screwdriver
T20 TORX
Screwdriver
Philips screwdriver
Screwdriver
POSIDRIVE screwdriver
Screwdriver
SPRING HOOK
VARNISH
5.2 DISASSEMBLING
5.2.1
DISASSEMBLING BASE COVERS
1- Remove the top cover (2 screws underneath the front) and 2 screws on the top at the rear. Do
not forget to remove the metallic cable holder above the display unit.
2- Remove the side covers fitted in the lower part. (3 screws for each)
3- Remove the lower cover (4 screws underneath the machine, through the 4 feet).
5.2.2
DISASSEMBLING MAIN PCB
1- Remove the top cover (refer to description chapter 5.2.1)
2- Disconnect the cables from the PCB
3- Remove the protection plate below the MAIN PCB (1 screw on the right)
4- Remove the MAIN PCB: 1 screw on the left in the middle of the board, 2 screws on the right side fixing the cooler). The bottom
one has just to be loosened.
Protection
plate
Screw
PCB screws