Formax FD 6100 Service Manual Download

Page: 50 / 113

ISSUE

: 21/09/03

FD 6100 MAINTENANCE

MANUAL

REVISION

: 2.1

SECTION

: 01

PAGE 49

CONTENTS

4.3.5

ENVELOPE BELT TENSION

PURPOSE: Make sure that the belt tension is correct.

ADJUSTMENT PROCEDURE:
-

Remove gear wheel (1) from the envelope feed motor.

Undo screw (2) fixing the tensionner in order to release it

Drive the belt in the 2 directions by turning manually the pulley and gear wheel (3).

While turning the pulley, tighten screw (2) in the tensionner lower position.

Fit again the motor gear wheel.

NOTE:
An incorrect adjustment of the belt tension will result in difficulties in the envelope feeding, as
well as in insertion, closing and ejection defect. These defects will be accompanied by a typical
knocking noise in the motor.

Summary of Contents for FD 6100


















































































































Search results

Summary of Contents for FD 6100

Reviews:

Related manuals for FD 6100

Brands by name

Popular brands

Formax FD 6100, Service Manual

Search results

Summary of Contents for FD 6100

Reviews:

Related manuals for FD 6100

Brands by name

Popular brands