ISSUE
: 21/09/03
FD 6100 MAINTENANCE
MANUAL
REVISION
: 2.1
SECTION
: 01
PAGE 46
-
A & B CLUTCHES SETTING PROCEDURE:
-
From the user CONTENTS, press ESC
and keep it pressed while pressing the key UP
, the following screen will appear:
-
Use the arrow key
to select the line “job number”,
and select "job from1-9" with the key UP
and valid with the key MEM
.
-
Select clutch A, set the value and valid with the key MEM
.
-
Use the same process for clutch B.
Note: the value reference is written underneath the feeder A-B
e
Exit this screen using the key ESC
to return to user mode.
Reference