Website
41
8.7 Mian Screen Lock Setup
This function is used to set the state of the transmitter after the main interface is locked.
[Lock only touch screen]: can prevent the transmitter screen from being touched by
mistake, because this may change the parameters that have been set.
[Only channel controllable after lock]: only the channel is controllable after selection.
This can avoid changing the set parameters when someone else perform operations or
accidentally toggles a switch for personal reasons.
[Only the steering wheel trigger controllable after lock]: after locking, all knob trims are
unavailable. This can prevent others from modifying channel data when operating on
behalf of others or changing setting parameters by accidentally toggling a switch for
personal reasons.
You can click the icon on the right of the corresponding function according to your
needs.
8.6 Home-Screen Quick Access
This function is used to set up the Up, Down, Left and Right quick sliding screen functions
of the main interface. Users can customize the sliding screen interface according to their
needs.
The [Home-Screen Quick Access] can help users find setting interfaces quickly. For
example, when users want to check the lap counting time after the function is enabled in
the model operations, users can use this function to enter the timer interface quickly.
Function settings:
1. Enter in the function interface, click the corresponding function option to choose it; and
select NONE to avoid quick operation;
2. Click back icon
so you can save the settings.
8.9 Auto Power Off
If the transmitter is powered on for a long time, the transmitter battery may be used
up. If the system detects that the transmitter is not used for a long time, it will be
automatically shut down.
If no operation is detected within five minutes, the system starts playing no operation
sound, Auto Power Off will turn off the transmitter if no receiver is connected .
To toggle Auto Power Off touch the box to the right of the setting. If there is a check in
the box the function is active.
8.8 Standby Timeout
The system will automatically shut down when the transmitter is not used for a long time.
This function allows you to set the alarm time to prompt you to use it.
Select [None]. It means the transmitter system has no idle alarm. After selecting other
durations, the system will continuously send out alarm prompts when idle time exceeds
the set value. If the alarm sound is disabled, the system gives only a vibration prompt.
