Website
47
8
Place the tube of the steering wheel in the
brake pad adjustment hole on the protruding
connector on the brake pad, and press the
steering wheel to fix it.
7
Insert the screw into the screw hole used
to secure the steering wheel, then align the
hexagonal screwdriver with the hexagonal
hole in the head of the screw, hold the side
of the steering wheel with one hand and turn
the screwdriver clockwise with another hand
until the screw is secured.
9
Insert the hexagonal screwdriver into the two
adjustment holes at the top of the steering
wheel and adjust the rotation angle of the
steering wheel as needed.
•
The tighter the screw, the smaller the rotation
angle. The looser the screw, the larger the
rotation angle.
10
Take the steering wheel sponge after fixing
the screws.
12
Reinstall the steering wheel sponge after
adjusting the brake pads.
1
1
The installation is complete. The transmitter
can be used normally.
Pay attention to your strength in the process of replacing the brake pads. Remember not to damage accessories.
Please refer to the above steps to replace the brake pads, to ensure that the brake pads can be used normally.
！
