Pro
Website
12
6.6 Timer
The timer function can be activated in three modes:
Mode 1:
1.Click the [Timer Mode: Up Timer] icon. Click the right side of the corresponding function
as needed. Click to return to the previous level interface.
2.Click [Start] to start the timer. Click [Stop] to stop the timer. Click [Reset] to reset the
single timer function to its default value.
Mode 2:
1.Click the [Throttle Start Timer] icon. Click "+" or "-" to change the throttle start value.
Press the "+" or "-" icon for seconds to accelerate the throttle start value. The value change
level is 1, and the level range is -100 to 100. Users can adjust it as desired.
2.Click the
icon to activate this function. The interface shows "Throttle start timer
open". That indicates successful activation.
3.
Verify that the settings are normal as expected. When the throttle is adjusted to the set
value, the timer will start timing.
Mode 3: The timer can be enabled or disabled quickly through the key assignment
function.
The system will send out a prompt once per recorded time.
The race timer has 3 modes:
[Up timer]: Counts up.
[Down Then UP Timer]: Counts down from the set time.There are intermittent voice
prompts for the countdown which starts from 0.
[Lap Timer]: Keeps track time for each individual lap.Once triggered the on icon will
become the lap icon. Each time the lap icon is pressed the last lap will be recorded in the
lap timer list. The maximum number of laps is 99 and the minimum lap time must be over
3 seconds.
Lap Memory: Records the results from the lap timer.
This function can set with a variety of timers, to generally calculate the total model run
time, competition specific time spent, or transmitter run time, etc.
