Pro
Website
40
8.3 Sound
This function is used to toggle all system sounds, including alarm sound, power-on/
power-off sounds and and adjust the volume.
[Volume]: Touch volume then select the desired volume from the list. Touch the back
icon to return to the previous menu.
[System sound]: Click the option box on the right side of the interface. The icon will
change to , indicating that the system sound is enabled. The system will give a
prompt sound in the following scenarios:
• The system will give a prompt sound when users click the transmitter function icon
and sets the icon or flip the transmitter interface.
• The system will give a prompt sound each time a key is toggled.
[System Sound]: Toggle system sounds by touching the box to the right of "System
sound". If there is a check in the box it is enabled.
• When the transmitter is not used for a long time exceeding the set idle alarm time,
the system will give a continuous "beep" alarm.
• When the high voltage alarm or low voltage alarm in the selected sensor exceeds the
set value, the system will give an alarm prompt.
[Alarm sound] and [Power On/Off sound] are the same as above.
8.4 Vibration
This function is used to enable or disable the system vibration and alarm vibration
function and adjust intensity of vibration levels.
[Vibrate Level]: Touch "Vibrate Level" then select the desired strength from the list.
Touch the back icon to return to the previous menu.
[System Vibrate]: Toggle system sounds by touching the box to the right of "System
Vibrate". If there is a check in the box it is enabled.
[Alarm vibration]: click the option box on the right side of the interface to enable the
alarm vibration. There are alarm prompts in the following scenarios:
• The transmitter has not been used for a long time, exceeding the set idle alarm
duration.
• The high voltage alarm or low voltage alarm in the selected sensor exceeds the set
value.
8.5 LED
The LED function can change the color of the LED strip above the power button of the
transmitter, the power indicator and the brightness adjustment of the strip.
[Type selection]
1. You can choose to turn off the LED.
2. LED can be used for power indication
(displaying different colors according to current
battery voltage)
;
•
High-green
•
Medium-yellow
•
Low-red
3. Select a color from the list.
[Brightness control]: Touch the "+" or "-" icon to adjust the LED brightness.
After setting, click the icon to return to save.
Touch the back icon to save and exit.
