Pro
Website
28
Setup:
1.
Click the
icon to enable this function. When this function is enabled, the icon will
change to
.
2.The system jumps to the [Key Setting] function
(please refer to [6.8 Key Setting] function
to assign corresponding switch for this Func Assign)
.
3. Click the "+" or "-" icons to change the percentage as needed.
6.18 ENG CUT
When Engine Cut is triggered via a button it sets the throttle channel to a predefined position.
This function must be assigned to a switch/button in order to be activated.
This function will reset after shutting down. Restart this function after turning on again.
Setup:
1.
Click the
icon to enable this function. When this function is enabled, the icon will
change to
.
2.
The system jumps to the [Key Setting] function
(please refer to [6.8 Key Setting] function to
assign the corresponding switch for this Func Assign).
3. Click the "+" or "-" icons to change the percentage as needed.
6.19 Cruise
When the cruise function is enabled, the throttle channel remains the channel value output
as power-on.
When the vehicle travels at the desired speed, the cruise function can be enabled, and the
vehicle will continue to travel at the same speed after it is enabled.
The function interface displays the percentage of throttle channel output value in real time.
When the function is enabled, the system exits the fixed speed cruise if the trigger is
detecting the braking state. At the same time, a pop-up window will appear, indicating that
"Cruise control off".
Setup:
1.
Click the
icon to enable this function. When this function is enabled, the icon will change to
.
2. The system jumps to the [ASSIGN] function, assign the switch for the cruise Func assign in the [Assign] function.
•
Assign SW key
(when TR1, TR2 key is in one-way mode, it can control the function to enable or disable)
to
enable/disable the cruise function quickly. A pop-up window will appear, indicating the current status.
•
Assign TR key
(when SW2 and SW3 are in the state of key combination, the value can be adjusted)
to adjust the
value of the fixed speed cruise. A pop-up window will appear in the adjustment by pressing the key, prompting
real-time value.
3. Click the "+" or "-" icons to change the percentage as needed.
The percentage cannot be adjusted when cruise function is not enabled.
6.20 SVC
The receivers configured with this function are INr4-GYB (built-in gyroscope) and GMr (with gyroscope interface).
After the transmitter has bound with the receiver in two-way mode, press the SVC to access the function, coming along
a prompt for gyroscrop level calibration. It is recommended that the user should follow the prompt on the interface to
complete the gyroscope calibration when using the gyroscope for the first time.
to keep it from stalling.
This function must be assigned to a switch/button in order to be activated .
This function will reset after shutting down. Restart this function after turning on again.
