Pro
Website
32
[Two Receiver Mode]
For a standard car and boat model, the FGr8B receiver with 8 channels can satisfy the
requirements.
This function can be used when you have two models that you want to control with the
same transmitter.
For Model Menu with more complex functions, such as excavators (loaders) with
extended fuel lines, dump trucks with hydraulic booms, etc., the FGR8B with 8 channels
is not enough. It needs to be determined according to the number of functions. You can
assign two receivers to the vehicle base function and the boom base function, and then
switch between them with Noble Pro's [Two Receiver Mode] function. Noble Pro has only
18 output channels. When the number of combined dual receiver channels exceeds the
number of channels pre-selected by the transmitter, extra channels cannot be used.
• When disconnecting the primary receiver or secondary receiver, the function of one
receiver will not be affected.
This function is used to adjust the amount of steering force when the receiver servo is
steered.
This function can be set when the transmitter RF Setting is set to [Mini-Z(FHSS)]. It is
hidden when the RF is set to other standards.
Setup:
1. Click "+" or "-" to change the percentage of steering force. The adjustment range is
0-100%, and the adjustment step is 1%. It also can be adjusted by assigning TR/VR key or
knob in the [Key Setting] function.
7.2 Steering Force
This function is used to adjust the sensitivity of the gyroscope on the receiver.
This function can be set when the transmitter RF Setting is set to [Mini-Z(FHSS)]. It is
hidden when the RF is set to other standards.
Setup:
1.Click "+" or "-" to change the percentage of gyroscope sensitivity. The adjustment range
is 0-100%, and the adjustment step is 1%. It also can be adjusted by assigning TR/VR key
or knob in the [Key Setting] function.
7.3
Gyro Gain
