Website
27
6.14 Throttle Middle
The throttle middle function is used to set the neutral position of the throttle and brake
to correct the problem of unequal throttle travel and brake travel of some models. If the
neutral position is not set correctly, the model may start acceleration and driving directly
after power-on.
Setup:
1. Click the "+" or "-" icons to change the percentage as needed.
2. Verify the settings are normal as expected.
Throttle Neutral creates a configurable dead zone for the throttle channel.
[Forward]: When it exceeds the dead zone, the throttle channel will output this value
directly to accelerate forwards.
[Dead Zone]: The range of the dead zone. By default, the value is 0%.
[Backward]: When it exceeds the dead zone, the throttle channel will can be braked or
ouput this value directly to accelerate forwards.
6.15 TH Neutral
Setup：
1. Touch "Forward", "Dead Zone" or "Backward" to select it.
2. Use the + and - icons to to change the percentage as needed.
3. Repeat with other settings as needed.
4. Test to make sure everything works as expected.
6.16 TH Curve
This function changes the shape of the thottles response curve.
Setup:
1. Assigned a switch for throttle curve in the function of [ASSIGN];
2.
Touch the
icon to enable the function. The icon will change to
when enabled.
3. Touch a point.
4. Use the + and - icons to raise or lower the points position as needed.
5. Repeat for the other points as needed.
6. Test to make sure everything is working as expected.
4. Repeat as needed.
5. Test to make sure everything is working as expected.
6.17 Idle Up
Throttle Idle Up is used for models that use a fuel based engine that will stall.
If left at 0 throttle. Idle up makes sure that the engine always has some throttle in order
