Make Settings for Alarm Distribution through E-mail
Make Settings for Alarm Distribution through E-mail
Instruction
Parameters for alarm distribution through email can be set.
Follow these steps to set up the email communication:
1.
Click Setup – General con
fi
guration – Email settings.
Result:
The Email settings window is opened.
2.
• Enter a valid Sender address (will be shown as the “From” address).
• Enter the SMTP server name and the SMTP port number (25 by default) to use
for sending the emails.
• Select if MIME encoding is to be used or not.
3.
• Enter up to four email recipients.
• Click Update.
Note!
If the unit is connected via a dial up modem connection, certain modem
settings must be done to enable the unit to initiate a dial up connection for email
sending. See section
Make Modem/PPP Settings
.
4.
If desired, click Send to test the email function.
93
