• Click Properties.
• Select
Internet Protocol (TCP/IP)
and click Properties in the Local Area Connection
Properties dialog box.
Result:
The Internet Protocol (TCP/IP) Properties dialog box is opened.
10.
• Tick
Use the following IP address
and enter the computer address in the IP address
fi
eld.
• Click OK and close the dialog boxes.
11.
Connect the computer to the LAN using an ethernet cable (CAT5 patch cable with
RJ-45 plugs).
12.
• Start a web browser (for example Internet Explorer).
• Enter the IP address of the unit (default is http://10.0.48.94) in the address
fi
eld
and click Enter.
Result:
The web tool login window is opened.
13.
Click Login.
Result:
The Login dialog box is opened.
Make a LAN connection using the operator panel
Follow these steps to make a connection between a computer and the base unit over a
Local Area Network (LAN) using the operator panel:
1.
Contact a local network administrator to check if the IP address and additional
ethernet settings of the base unit have to be changed before connecting to an
existing LAN. If the base unit IP settings
• has to be changed, continue with step 2.
• does not have to be changed, continue with step 9.
Comment:
The IP address and ethernet settings of the base unit must not interfere
with existing network units.
2.
• Go to Log in (2.3) in the Setup menu.
• Press OK to enter edit mode.
Result:
Position 1 of the password is
fl
ashing.
3.
• Press up arrow once to enter the digit 1.
• Move to the next position using right arrow.
4.
• Enter the rest of the password (default is 1234) using up and right arrow.
• Press OK.
Result:
Menu Change password (2.4) is displayed.
5.
• Go to General con
fi
g (2.5) in the Setup menu using down arrow.
• Press OK to enter menu Clock (2.5.1).
• Go to menu Ethernet IP address (2.5.16) using down arrow.
Comment:
If more than one unit is to be connected to the LAN, the three
fi
rst
groups of the IP address must be the same for the different units. This makes them
part of the same subnet. The number in the last (rightmost) group must be different
for the units to make them unique nodes in the network.
6.
Enter an IP-address for the base unit that is compliant with the existing LAN (check
with the network administrator):
• Press OK to enter edit mode.
• Change value in position 1 using up/down arrow.
• Go to position 2 using right arrow and change value.
48
