View Operation Data Using the Operator Panel
View Status
on Digital I/O
Ports
Follow these steps to view status on digital I/O ports:
Step
Action
1
Go to menu Digital I/O ports (1.23) using down arrow.
2
Press OK to go to the
fi
rst digital I/O channel, Run input (1.23.1), and to view its
present status (On/Off).
3
Press down arrow to view the status of the other I/O ports (Reset input, A-alarm
relay, B-alarm relay and Go relay).
View
Additional
Data from
the Power
Analyzer
If there is a Power analyzer in the system it is possible to view additional data besides
the existing channels for power analysis.
Follow these steps to view additional operating data from the Power analyzer:
Step
Action
1
Go to menu Power analyzer (1.24) using down arrow.
2
Press OK to go to the
fi
rst information menu, Pump voltage ph 1 (1.24.1), and to
view its present status.
3
Press down arrow to view the status of the other information menus (Pump
voltage ph 2 and ph 3, Pump current ph 1, ph 2 and ph 3, Pump current mean,
System voltage, System power, System power factor and Total energy counter).
125
