VT Plus HF
Operators Manual
4-14
Restore Defaults
This returns all values to the factory defaults listed below, but does not change the device
calibration.
To restore defaults, follow these steps:
1.
Enter the system screen from the setup menu.
2.
Use the
∧
and/or
∨
soft key to highlight the line labeled
RESTORE DEFAULTS.
3.
Press the
MODIFY
soft key.
4.
After a few seconds, a series of beeps indicates defaults have been restored
5.
Press the
BACK
soft key to return to menu options.
Factory Defaults
System:
Date Format:
MM/DD/YYYY
Demo Data:
Off
Filtering:
None
Display Cal Date:
Yes
Serial Mode:
None
Printer Options:
Printer
Type:
None
Graphics:
Text Only
Audio Levels:
General:
Low
Keypad:
Low
Errors:
Low
Settings:
Gas Settings:
Gas
Type:
Air
Gas Temperature:
22 C
Ambient Temperature: 22 C
Rel. Humidity:
33 C
Correction Mode:
ATP
Baro Press Units:
mmHg
Barometric Pressure: [actual measurement in your location, e.g. 656.9]
Breath Detect:
BiDirectional
LF BD Threshold:
0.50 lpm
HF BD Threshold:
2.00 lpm
Bi-Dir Tidal Vol:
Inspiratory
Zero Mode:
Auto
Displays:
Flow:
Range:
High
Flow
Units:
LPM
Air
Scale:
-100.00 to +100.00
Pressure:
Range:
Airway
Units:
cmH20
Scale:
-100.00 to +100.00
Summary of Contents for VT Plus HF
