EtherScope™ Series II
Getting Started Guide
68
Specifying the IP Address of the Remote Device
You can designate a device for use in all of the RFC 2544
tests or you can designate a particular device for each
individual test.
1.
Select RFC 2544 Tests and then tap
.
2.
Do one of the following:
•
To specify a device for all RFC 2544 tests, tap RFC
2544.
•
To specify a device for a specific test, tap the
name of the test or device.
3.
Tap
.
4.
In the Add Device box, select the device from the
drop-down list box or select (User Defined) and
supply the IP address of the device.
5.
Click
.
Note
Repeat this procedure to add additional devices
for use in the individual tests. The device name
or IP address is added to the list of devices under
the individual test and can be selected when
you run a test.
Configuring the RFC 2544 Tests
You need to configure the test parameters and the
parameters for the remote device participating in the
test. You can set global configuration parameters that
apply to all devices used and all tests in this suite or you
can configure the devices and tests individually.
The following procedures show you how to access the
configuration screens. See the online Help for detailed
descriptions of the RFC 2544 test configuration
parameters.
