EtherScope™ Series II
Getting Started Guide
16
Adjusting the Brightness of the Screen
Note
The degree of brightness is a significant factor in
conserving battery power. Turning the
brightness up causes the instrument to use more
battery power.
To adjust the brightness:
1.
Tap
then select
Settings.
2.
Tap the Light & Power icon .
3.
On the Light and Power screen, you can do the
following:
•
Select the desired Power saving settings. To do
this, tap (to check) an option. Then, for each
option, specify a time interval.
•
Adjust the brightness. To do this, tap and drag
the slider control until the desired level of
brightness is achieved.
4.
Click
to save the settings.
Setting the Time and Date
The current time is displayed in the lower right corner of
the status bar. To change the time and date, do the
following:
1.
Tap the current time.
2.
Select Set time to display the Date/Time screen.
3.
Select date and time settings and formats.
4.
Tap
to save your changes.
The instrument now displays the new time on the
status bar.
