Fluke 9640A Series, Instruction Manual

Page: 97 / 324

Local Operation
Operating the Instrument
3
3-49
Table 3-17. Frequency-Modulation Fields (cont.)
Mod Rate 1 Hz to 300 kHz Hz (kHz)
Rate Step
0.1 Hz to 300 kHz Hz (Hz, kHz)
Absolute
Offset may be applied in
either polarity to the full
dynamic range of the parent
parameter Hz (kHz), ppm**, %*
Rate Offset
As UUT Error
Will be calculated for any
permitted Offset value
subject to limitations of % or
ppm if these units are used
(see below) ppm**, %**
Deviation
.010 kHz to 4.8000 MHz
Dev
≤
300 kHz
9 MHz to 31.4375 MHz
Dev
≤
750 kHz
>31.4375 to 125.75 MHz
Dev
≤
0.12% Frequency
>125.75 MHz
Hz (Hz, kHz, MHz)
Step Size
0.1 Hz to 4.8000 MHz Hz (Hz, kHz, MHz)
Absolute
Offset may be applied in
either polarity to the full
dynamic range of the parent
parameter Hz (kHz, MHz), ppm**, %*
Deviation Offset
As UUT Error
Will be calculated for any
permitted Offset value
subject to limitations of % or
ppm if these units are used
(see below) ppm**, %**
* Any entry expressed in % (or converted to %) is subject to a limit of +/-1000%.
** Any entry expressed in ppm (or converted to ppm) is subject to a limit of +/-10000ppm