Fluke 9640A Series, Instruction Manual

Page: 322 / 324

9640A
Instruction Manual
B-2
Fatal – Measurement Integrity Compromised
Some of these errors may be recoverable by making Leveling Head interconnection
checks and/or restarting the Instrument. When one or more of these errors tend to repeat,
contact a Fluke Service Center for advice. Most will require calibration of the source.
•
Internal Hardware Failure (ADC Overflow); Contact Service Center
•
Internal Hardware Failure (ADC Conversion); Contact Service Center
•
NV Storage (Flash) error; Defaults in use; Internal Alignment required
•
NV Storage (Flash) error;Failed to store new values
•
NV Storage (Flash) error; Defaults in use
•
NV Storage (User Prefs) error; Defaults in use;Re-establish User Prefs
•
NV Storage (User Prefs) error; User Prefs have not been saved
•
Calibration stores header corrupted; Defaults in use; Re-calibration required
•
Calibration stores data corrupted; Defaults in use; Re-calibration required
•
Calibration header unknown; Defaults in use; Re-calibration required
•
Unable to write to calibration store; Check calibration switch
•
Cannot access calibration stores; Defaults in use; Re-calibration required
•
Cannot access head unit calibration stores; Defaults in use; Re-calibration required
•
Cannot access base unit calibration stores; Defaults in use; Re-calibration required