Fluke 9640A Series, Instruction Manual, Page: 143 / 324

SCPI Commands
SCPI Command Reference
4C
4C-7
INPut Subsystem
Keyword
[1]
Parameter Form
*RST
Condition
Notes
:INPut
Command long
form
:INP:REAR[?]
<type>{DISable|
LEVel | PULL}
DISable
Selects the input
mode of the rear
BNC connector
:INP:LEVel:FSV[?] <NRf> Unchanged
Selects the
external leveling
Full Scale Voltage
:INP:LEVel:FSP[?] <NRf> Unchanged
Selects the
external leveling
Full Scale Power
:INP:LEVel:RTIMe[?]
<name>{SLOW| FAST}
SLOW
Selects the
external leveling
filter speed
:INP:LEVel:CLAMp[?] <NRf> Unchanged
:INP:FREQuency
:POLarity[?]
<type>{POSitive
|NEGative }<NRf>
NEGative
Selects the
directon of pull a
positive voltage
change has on the
frequency
:INP:FREQuency:GAIN <NRf> Unchanged
Selects the
frequency pull gain
value
[1] These command nodes are only valid when the SINE instrument is selected.