Fluke 9640A Series, Instruction Manual

Page: 96 / 324

9640A
Instruction Manual
3-48
12. To make the frequency-modulated wave available as an RF Output signal, press the

key.
13. To step
Carrier Frequency
,
Carrier Level
,
Modulation Rate
, or
Modulation
Deviation
, select the appropriate field and use the cursor keys to increase or decrease
the output level by the value previously entered in the step field
(Step Size)
.
Table 3-17. Frequency-Modulation Fields
ead93f.bmp
Field Range Units
Frequency 9.000000000 MHz to
4.0240000000 GHz Hz (MHz, GHz)
Frequency Step
0000001 MHz to
4.0240000000 GHz Hz (kHz, MHz, GHz)
Absolute
Offset may be applied in
either polarity to the full
dynamic range of the parent
parameter Hz (kHz, MHz, GHz), ppm**, %*
Frequency Offset
As UUT Error
Will be calculated for any
permitted Offset value
subject to limitations of % or
ppm if these units are used
(see below) ppm**, %**
Level -130.000 to 24 dBm (50
Ω
)
20 dBm max >125.75 MHz
14 dBm max > 1.4084 GHz
-136.000 to 18 dBm (75
Ω
)
14 dBm max >125.75 MHz
8 dBm max > 1.4084 GHz
dBm, Vp-p and Vrms (uV, mV, V),
W (nW, uW, mW, W), dBuV
Level Step
0.001 dB to 130 dB dB, Vp-p and Vrms (uV, mV, V), W
(nW, uW, mW, W), ppm**, %*
Absolute
Offset may be applied in
either polarity to the full
dynamic range of the parent
parameter dB, Vp-p and Vrms (uV, mV, V), W
(nW, uW, mW, W), ppm**, %*
Level Offset
As UUT Error
Will be calculated for any
permitted Offset value
subject to limitations of % or
ppm if these units are used
(see below) dB, ppm**, %*