Fluke 9640A Series, Instruction Manual

Page: 323 / 324

Appendix
Error Descriptions
B
B-3
Operational Advice (On-Screen)
The following messages offer in-context information or advice for the user. All of these
messages indicate conditions from which the user can easily recover.
General Operation
•
Head removed; Output has been forced to Standby
•
Head not fitted; Cannot turn output to Operate
•
Please wait - saving settings
•
Completed saving settings
•
Ext AM Overload Error; Reduce Input Signal Level
•
Ext FM Overload Error; Reduce Input Signal Level
•
Cannot translate into selected units as result is out of range
•
The value is outside its edit limits
•
The entered value was too small
•
The entered value was too big
•
The total offset was too small
•
The total offset was too big
•
No more digits
•
Too many characters
•
No more characters to delete
•
Character invalid in this context
•
Redundant character skipped
•
Operation invalid in this context
•
The entered span is zero
•
The entered span is too big
•
The sweep duration is invalid; Check the step, and span (start or stop) settings
•
Cannot convert units; Check the step, and span (start and stop) settings
•
Outside the frequency or amplitude profile
•
Outside the carrier frequency/deviation profile;Max deviation = 300kHz
•
Outside the carrier frequency/deviation profile;Max deviation = 750kHz
•
Outside the carrier frequency/deviation profile;Max deviation = 0.12% fc
•
This field has no optional units
•
UUT error > +/- 1,000% - Outside direct translation range
•
UUT error > +/- 10,000 ppm - Outside direct translation range
•
Units cannot be changed when directly editing value
•
Cannot turn output to Operate - invalid context
•
Outside the Frequency/Rate profile;Max Rate = 1% fc
•
Outside the frequency/rate profile. Maximum rate = 100kHz when fc > 125.75MHz
•
Cannot accept the entered UUT error as the resultant offset is out of range
•
Step size invalid ; Check the step and span (start or stop) settings