Fluke 9640A Series, Instruction Manual

Page: 153 / 324

SCPI Commands
SCPI Command Reference
4C
4C-17
UNIT Subsystem (cont.)
Keyword
Parameter
Form
*RST
Condition
Notes
UNIT:FM:INT:FREQ:OFFS[?]
<name>
{HZ, PCT,
PPM}
Hz
This command sets the units of
the rate of the currently selected
instrument.
PCT is for percent, PPM is for
parts per million
UNIT:FM:INT:FREQ:OFFS
:ERRor[?]
<name>
{PCT, PPM}
PCT
This command sets the units of
all rate offset error commands of
the currently selected
instrument.
PCT is for percent, PPM is for
parts per million
UNIT:PM:DEV:OFFS[?]
<name>{RADi
an, PCT,
PPM}
RAD
This command sets the units of
the deviation commands of the
currently selected instrument.
PCT is for percent, PPM is for
parts per million
UNIT:PM:DEV:OFFS:ERRor[?]
<name>{PCT,
PPM}
PCT
This command sets the units of
all deviation offset error
commands of the currently
selected instrument.
PCT is for percent, PPM is for
parts per million
UNIT:PM:DEV:OFFS:ERRor[?]
<name>{PCT,
PPM}
PCT
This command sets the units of
all deviation offset error
commands of the currently
selected instrument.
PCT is for percent, PPM is for
parts per million
UNIT:PM:INT:FREQ:OFFS:ERRor
[?]
<name>{PCT,
PPM}
PCT
This command sets the units of
all rate offset error commands of
the currently selected
instrument.
PCT is for percent, PPM is for
parts per million
:UNIT:SWEep:STEP[?]
<name>
{SPS | SPD
| HZ | PPM
| PCT}
Hz
Sets the units for the sweep step
size.
SPS is for Steps Per Sweep
SPD if for Steps Per Decade.
:UNIT:SWEep:PROGress[?]
<name>
{PCT |
RANGe}
PCT
Select Sweep Progress Units.
:UNIT:OCLamp[?]
<name>{DBM
| W | dBuV
| VRMS |
VPP}
DBM
This command sets the units for
the external leveling output
clamp.