FLIR TCX series Instruction Manual Download

Page: 70 / 150

2. Right-click and click

Pan/Tilt/Zoom

. Enter the system user name and password if

prompted. The PTZ menu opens.

NOTE

The following message will appear when attempting to access the PTZ menu if the communication
parameters have not been correctly set for your camera. See above for details.

3. Click the arrow in the PTZ control window to show advanced controls.

4. Click

. The OSD menu appears over the camera image.

5. Use the on-screen controls to configure menu items:

•

Up / down arrows:

Select menu items.

•

Left / right arrows:

Change value for menu items.

•

Cancel:

Exit the OSD menu.

•

Enter:

Enter the menu item.

#LX400062; r.30885/35920; en-US

Summary of Contents for TCX series























































































































































Search results

Summary of Contents for TCX series

Reviews:

Related manuals for TCX series

Brands by name

Popular brands

FLIR TCX series, Instruction Manual

Search results

Summary of Contents for TCX series

Reviews:

Related manuals for TCX series

Brands by name

Popular brands