FLIR TCX series, Instruction Manual

Page: 18 / 150

Live View 5
5.1.1 PTZ Controls
1. Click the arrows to move the camera.
2. Click the middle button to engage EZoom and then click and drag on the video to set
the camera EZoom and position.
3. Adjust the camera speed.
NOTE
The EZoom is an internal camera setting that will effect all video streams. Click and drag over an area
from the left to the right and the camera will zoom in and center the enclosed image. Drag from the right
to the left and the camera will zoom out and center the enclosed image.
5.1.2 Scan
You can use the Scan function to have the camera move automatically between two
points.
To configure the scan function:
1. Select Scan from the dropdown menu under PTZ Function .
2. Click Start to begin the scan.
5.1.3 Preset
You can save preset positions in the camera to recall them later.
To go to a preset location:
#LX400062; r.30885/35920; en-US 10