FLIR TCX series, Instruction Manual

Page: 42 / 150

Setup 6
To configure SMTP Settings:
1. Configure the following:
• SMTP Server : Enter the SMTP server address.
• Port : Enter the Port used by the server.
• Anonymity : Check if the server allows anonymous logins or uncheck to enter cre-
dentials to access the server.
• Username : Enter the user name of the sender’s account.
• Password : Enter the password of the sender’s account.
• Sender : Enter the sender’s email account.
• Authentication : Select SSL or TLS .
• Mail Receiver : Enter the email address that will receive email alerts.
• Interval : Select the interval for sending email alerts. The system will only send
email alerts after this interval has passed.
• Health Mail : Check to enable the camera to send health alerts. If you enable
health alerts, enter the interval in seconds under Update Period .
2. Click Email Test to send a test email using the settings you have entered.
3. Click Save to save changes.
6.2.8 UPnP
UPnP allows you to map port numbers between the LAN and the Internet. Depending on
your router version, you may need to disable UPnP function.
6.2.9 Bonjour (unsupported)
6.2.10 Multicast (Advanced)
When there are multiple hosts receiving the same data packets, multicast is the best op-
tion to reduce the bandwidth and the CPU load. The source host can send out one data
set.
#LX400062; r.30885/35920; en-US 34