FLIR TCX series, Instruction Manual

Page: 41 / 150

Setup 6
NOTE
If you enable the IP filter the camera will block any device that is not listed. Make sure the correct devi-
ces are added to the list, or you may not be able to access the camera.
To filter connections based on IP or MAC addresses:
1. Click Add IP/MAC .
2. Select IP Address or MAC Address and then enter the address of the device you
would like to add to the white list.
3. Click Save .
4. Check Trusted Sites .
5. Click Save to save changes.
6.2.7 SMTP (Email)
The SMTP menu allows you to set up email alerts for motion or alarms.
#LX400062; r.30885/35920; en-US 33