FLIR DNR516, Instruction Manual

Page: 86 / 198

Using the Main Menu 15
Note
This function only saves settings created in system menus. It does not save or backup any video.
To save your system configuration to a USB thumb drive:
1. Insert a USB thumb drive (not included) into one of the USB ports.
2. From the Main Menu, click and then click Setting>Config Backup .
3. Under Device Name , select the USB device where you would like to save the
configuration.
4. Click EXPORT to save your current system configuration.
To restore a saved system configuration:
1. Insert a USB thumb drive (not included) with a saved system configuration into one of
the USB ports.
2. From the Main Menu, click and then click Setting>Config Backup .
3. Under Device Name , select the USB device.
4. Click the folder with the configuration files you would like to restore. Configuration file
folders are labeled “Config” and then the time and date the configuration was saved (e.
g.
Config_20140425103727 ).
5. Click IMPORT to restore the system configuration.
6. Click OK to confirm. The system will restart to complete the operation.
15.3.27 Setting the System to Factory Defaults
The Default menu allows you to reset the system to factory default settings.
#LX400023; r. 1.0/17332/17359; en-US
76