FLIR DNR516, Instruction Manual

Page: 101 / 198

Using FLIR Cloud™ Client for PC or Mac 17
5. Use the chart to select which presets you would like to include in the tour and the order
of presets.
• Preset : Select the preset number.
• Time(s) : Enter the time in seconds the camera will remain on the selected preset.
• Operation : Click to add a preset to the tour. Click to delete a preset from
the tour.
6. Click OK to save changes.
To run a PTZ tour:
1. Select the tour number and click .
17.3.3 PTZ Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click to open the Advanced controls. Select Pattern .
2. Select the number of the pattern you would like to set up.
3. Move the camera into the desired start position.
4. Click to start recording the pattern.
5. Move the camera to the desired end position. Then, click to stop recording the
pattern.
To run a pattern:
1. Select the pattern number and click .
#LX400023; r. 1.0/17332/17359; en-US
91