FLIR DNR516, Instruction Manual

Page: 57 / 198

Using the Main Menu 15
To configure audio recording:
1. From the Main Menu, click and select Recording>Recording .
2. Select the audio-enabled camera under Channel .
3. Check the left Audio/Video checkbox to enable audio recording. Check the middle
checkbox to enable audio streaming to remote devices (such as a smartphone). Check
the right checkbox to enable video streaming to remote devices.
4. Click OK to save changes.
15.1.8 Configuring Snapshot Recording Settings
The system can be set to record snapshot images when a camera detects motion. These
snapshots can be viewed through the Search menu or can be attached to email alerts and
push notifications. The Snapshot tab in the Recording menu controls the quality and re-
cording parameters for each camera.
Note
In order to enable Snapshot recording, the following menu options must be configured:
• The Snapshot schedule must be enabled for times that you would like to save snapshots. See
15.3.17
Configuring the Snapshot Schedule , page 66.
• Snapshot recording must be enabled for motion detection in the Event menu. See 15.3.8 Configuring
Motion Detection , page 58.
To configure snapshot recording settings:
1. From the Main Menu, click and select Recording>Snapshot .
2. Under Snap Number , select the number of snapshots the system will take when the
snapshot button is pressed.
#LX400023; r. 1.0/17332/17359; en-US
47